KRK 12s

KRK 12s

KRK 12s powered subwoofer is the perfect complement to KRK VXT series, KRK ROKIT series, or any other 6″-10″ studio monitor. The KRK 12s is designed to extend the response of an existing monitor system so that the low-frequency portion of the mix can be engineered. The KRK12s features the powerful accurate and low distortion sound that is the hallmark of all KRK monitor systems.

MSRP: $899.99

Features:

  • Curved Baffle Curved front plate design virtually eliminates diffraction distortion
  • Front-firing Port provides low frequency extension while reducing boundary coupling and the unique shape is optimized to avoid port turbulence
  • Bypass Footswitch Control allows you to defeat the sub and provide full range audio to your recording monitors for use with a standard latching inch mono footswitch
  • Kevlar 12″ Driver -High Excursion woven Kevlar driver cone
  • Thermal and Overload / Clip Protection to prevent damage
  • Volume Control on rear of unit allows a high resolution gain range from -30 dB to +6 dB.
  • Metal Grill is standard to protect the driver from damage

Specification:

  • Configuration:Front loaded, vented subwoofer
  • System type:Active Subwoofer
  • Low-Frequency:12″ woven Kevlar woofer
  • Frequency Response: 32Hz – 139Hz (left / right inputs)
  • Max Peak SPL:119.5 dB
  • Amplifier Class:Class A-B
  • Power Output:240 Watts Continuous @ 1% THD+N @ 100Hz
  • SNR (signal to Noise Ratio):102dB
  • Amplifier Distortion (THD+N): ≤ 0.1% @-3dB of Max Power Output 20Hz – 200Hz
  • Input Impedance (Ohms):10 kΩ Balanced or unbalanced
  • Ground Lift:On / Off
  • Low Pass Frequency:55Hz to 170Hz
  • HPF bypass:with footswitch only
  • Footswitch:Optional
  • Phase:0 or 180 degrees
  • System Volume:-30dB to +6dB
  • Indicators:Power, protection
  • Input Connectors:
    • Stereo RCA for left and right, Stereo balanced TRS for left and right, stereo balanced XLR for left and right
  • LFE input:balanced TRS
  • Output Connectors:
    • Stereo RCA for left and right, Stereo balanced TRS for left and right, stereo balanced XLR for left and right
  • AC Power Input: Selectable 110V-120V / 220V-240V
  • Enclosure Construction: 18mm reinforced MDF
  • Finish: Textured Paint
  • Port Configuration: Front firing slot port
  • Grille: Metal Mesh
  • Dimensions (H x W x D): 18.11″ (460mm) x 15.94″ (405mm) x 22.64″ (575mm)
  • Weight: 66.44 Lbs. (30.14 Kg.)


Leave a Comment